You are here:Home|STONESHIELD™

    Brick & Masonry Cleaner

    FEATURES

    • Stoneshield Brick & Masonry Cleaner – is an inhibited acid-based cleaner for the removal of cement and mortar residues.
    • An inhibited acid prevents attack and tarnish to metal surfaces.
    • Contains emulsifying detergents to remove oils and grease.

    USES

    • For clay face bricks, clay paving bricks, natural stone, slate, terracotta, glazed and unglazed ceramics.
    • Also suitable for etching concrete floors prior to coating.
    SKUDescriptionUnits
    800/04/011 Brick & masonry cleaner 1 Litres
    800/04/028 Brick & masonry cleaner 5 Litres
    800/04/029 Brick & masonry cleaner 25 Litres

    Ceramic & Porcelain Tile Cleaner

    FEATURES

    • Stoneshield Ceramic & Porcelain Tile Cleaner is a concentrated detergent cleaner formulated for gentle everyday use.
    • Use internally and externally to remove surface soiling and general dirt.
    • Eliminates soap build-up and reduces hard water deposits.

    USES

    • Suitable for use on glazed and unglazed ceramics, polished and unpolished porcelain.

    SKUDescriptionUnits
    800/04/066 Ceramic & Porcelain Tile Cleaner 1 Litres
    800/04/073 Ceramic & Porcelain Tile Cleaner 5 Litres

    Deep-clean™

    FEATURES

    • Stoneshield Deep-Clean™ is a concentrated heavy-duty degreasing cleaner and acid neutralizer, designed for use in indoor and outdoor areas; garages and areas subject to heavy traffic and use.

    USES

    • Effective on natural stone, marble, granite, travertine, limestone, slate, terrazzo, terracotta, bricks, cement tiles, concrete floors, glazed and unglazed ceramics.

    SKUDescriptionUnits
    800/05/034 Deep-clean™ 1 Litres
    800/05/041 Deep-clean™ 5 Litres
    800/05/042 Deep-clean™ 25 Litres

    Grout-lift™

    FEATURES

    • Stoneshield Grout-Lift™ is an inhibited acid-based cleaner for the removal of cement and grout residues.
    • An inhibited acid prevents attack or tarnish to metal surfaces. Contains detergents to remove oils and grease.

    USES

    • On natural stone, slate, terracotta, bricks, porcelain, glazed and unglazed ceramics.

    SKUDescriptionUnits
    800/05/058 Grout-lift™ 1 Litres
    800/05/065 Grout-lift™ 5 Litres
    800/05/066 Grout-lift™ 25 Litres

    Daily-clean™

    FEATURES

    • Stoneshield Daily-Clean™ is a multi-surface cleaner for gentle everyday use.
    • Use internally and externally to remove surface soiling and general dirt.
    • Stoneshield Daily-Clean™ eliminates soap build-up and reduces hard water deposits.

    USES

    • Suitable for use on glazed and unglazed ceramics, porcelain, granite, marble, travertine, sandstone, slate and all sealed surfaces including natural stone, terracotta, quarry tiles, vinyl and cement tiles.

    SKUDescriptionUnits
    800/08/024 Daily-clean™ (Rtu) 500ml
    800/05/010 Daily-clean™ 1 Litres
    800/05/027 Daily-clean™ 5 Litres
    800/05/028 Daily-clean™ 25 Litres

    Granite Countertop Cleaner

    FEATURES

    • Stoneshield Granite Countertop Cleaner is a ready to use spray and wipe, granite countertop cleaner for everyday use.
    • Fast and effective removal of grease, grime and general dirt.
    • Cleans and disinfects in one easy step.

    USES

    • Suitable for use on all granite and natural stone surfaces.

    SKUDescriptionUnits
    800/07/018 Granite Countertop Cleaner 500ml

    Grout-cleaner

    FEATURES

    • Stoneshield Grout-Cleaner is a ready to use non-acidic cleaner designed for regular use on grout joints.
    • Stoneshield Grout-Cleaner eliminates soap build up and reduces hard water deposits.

    USES

    • For the removal of grease, grime, mould and mildew, soap deposits and dirt from grout joints. Use internally and externally.

    SKUDescriptionUnits
    800/07/001 Grout-cleaner 500ml
    800/07/049 Grout-cleaner 5 Litres

    Mould-x™ Mould & Mildew Cleaner

    FEATURES

    • Stoneshield Mould-X™ is a specially formulated fast acting cleaner for the removal of mould and mildew, black stains and algae.
    • Regular use prevents the re-growth of mould and mildew. Cleans and disinfects all in one.

    USES

    • Use internally on ceramic, porcelain and enamel surfaces; tiles and tile grout in bathrooms and showers.
    • Use externally on bricks, walls, paving, floor and roof tiles.
    • Use undiluted as supplied.
    SKUDescriptionUnits
    800/06/033 Mould-x™ (Rtu) 500ml
    800/06/040 Mould-x™ 5 Litres

    Rust-x™

    FEATURES

    • Stoneshield Rust-X™ is an acid-based gel cleaner designed for the removal of red soil stains, rust, air and carbon pollution, oxidization, mould and mildew stains. Safer than conventional acid-based cleaners.

    USES

    • Suitable for use on unpolished and acid resistant natural stone, unsealed concrete and masonry surfaces, terracotta and quarry tiles.
    • For use on walls and floors.
    SKUDescriptionUnits
    800/07/056 Rust-x™ 1 Litre
    800/07/063 Rust-x™ 5 Litres

    X-treme-clean™

    FEATURES

    • Stoneshield X-Treme-Clean™ is a water-based biodegradable non-scratching abrasive cream cleaner designed to remove factory applied waxes, light grout residue, rubber and pencil marks and ingrained dirt from textured and difficult to clean surfaces.

    USES

    • Suitable for use on textured ceramics, polished and unpolished porcelain tiles and natural stone.
    SKUDescriptionUnits
    800/07/070 X-treme-clean™ 1 Litre
    800/07/087 X-treme-clean™ 5 Litres
    800/07/088 X-treme-clean™ 25 Litre

    Stainless Steel Cleaner

    FEATURES

    • Stoneshield Stainless Steel Cleaner is a non-abrasive foam aerosol cleaner for stainless steel, chrome and aluminum. It is non-abrasive and contains natural lemon extracts.

    USES

    • Use on stainless steel fridges, appliances, toasters, kettles, work surfaces, decorative trim, aluminum and metal furniture.
    SKUDescriptionUnits
    800/02/078 Stainless Steel Cleaner 300 ml

    Concrete Densifier – Lithium

    FEATURES

    • Stoneshield Concrete Densifier – Lithium is a specially formulated water based, penetrating, natural look sealer.
    • No surface film, anti-dusting repellent designed to protect, densify and harden the concrete surface.
    • For interior and exterior use.

    USES

    • Used as a final finish to densify and harden structurally sound new or existing concrete surfaces by up to 40%, improving wear and tear and providing anti-dusting properties.
    • Used to densify polished concrete floors during the grinding and polishing process.
    • Can be used as a stand-alone product or in conjunction with other sealers.
    SKUDescriptionUnits
    800/08/100 Concrete Densifier - Lithium 5 Litres

    Industrial Concrete Sealer

    FEATURES

    • Stoneshield Industrial Concrete Sealer is a premium quality high gloss, solvent based, urethane sealer that provides anti-dusting, maximum stain resistance, surface protection and ease of cleaning.

    USES

    • Designed for all types of concrete floors.
    • Can also be used on commercial and domestic concrete floors, where maximum surface protection and stain resistance are required.
    • Use only on unpigmented concrete.
    • Suitable for interior and exterior use.
    SKUDescriptionUnits
    800/05/089 Industrial Concrete Sealer 5 Litres

    Penetrating-sealer™ Colour-enhancer

    FEATURES

    • Stoneshield Penetrating-Sealer™ Colour-Enhancer is a premium quality solvent-based penetrating, no-sheen, no surface film, colour enhancing water and oil repellent for maximum stain protection.
    • Allows water vapour transmission.

    USES

    • Can be used as a pre-grouting sealer on clean surfaces at least 6 hours before grouting.
    • Suitable on unpolished, tumbled, flamed, natural and honed natural stone tiles including marble, travertine, granite, limestone, sandstone, quartzite; cement pavers and tiles, masonry surfaces, low porosity terracotta and quarry tiles.
    • For interior and exterior use.
    SKUDescriptionUnits
    800/02/075 Penetrating-sealer™ Colour-enhancer 1 Litres
    800/02/082 Penetrating-sealer™ Colour-enhancer 5 Litres

    Porcelain-tile-sealer

    FEATURES

    • Stoneshield Porcelain-Tile-Sealer is an economical solvent-based, penetrating, natural look, no-sheen, no surface film, water repellent for general stain protection.
    • Allows water vapour transmission.

    USES

    • Can be used as a pre-sealer on to clean surfaces at least 6 hours before grouting.
    • Suitable on polished and unpolished porcelain, vitrified and unglazed ceramics and other low porosity polished natural stone and it is also suitable as a grout sealer.
    • For interior and exterior use.
    SKUDescriptionUnits
    800/03/036 Porcelain-tile-sealer 1 Litres
    800/03/043 Porcelain-tile-sealer 5 Litres

    Wall-cladding-sealer™

    FEATURES

    • Stoneshield Wall-Cladding-Sealer™ is a superior quality natural look, no sheen, no surface film, solvent-based penetrating water repellent, designed to provide protection against rain, moisture, general airborne dirt, pollution, mould and mildew.
    • Allows water vapour transmission.

    USES

    • Suitable on most natural stone such as marble, granite, sandstone, cast stone, porcelain, terracotta, clay, cement and concrete bricks and blocks and masonry surfaces.
    • Can also be used as a primer for silicone paints, emulsion paints and resin plasters.
    • For interior and exterior use.
    SKUDescriptionUnits
    800/00/022 Wall-cladding-sealer™ 1 Litres
    800/00/040 Wall-cladding-sealer™ 5 Litres

    Grout Sealer

    FEATURES

    • Stoneshield Grout Sealer is an easy to use one-step penetrating aerosol sealer especially formulated for grout.
    • A no-sheen, no surface film, natural look finish. Leaves no hard to remove surface residue and prevents mould and mildew growth.

    USES

    • Suitable for use on all grout joints between ceramic, porcelain and natural stone tiles.
    • For use on wall and floor grout.
    • For interior and exterior use.
    SKUDescriptionUnits
    800/04/080 Grout Sealer 500 ml

    Home & Dry® – Masonry & Brick Repellent

    FEATURES

    • Stoneshield Home & Dry® masonry & brick water repellent is a superior quality natural look, no sheen, no surface film, solvent- based penetrating water repellent, designed to provide protection against rain, moisture, general airborne dirt, pollution, mould and mildew.

    USES

    • Suitable on clay and cement bricks and blocks, fibre cement; concrete and masonry surfaces; natural and artificial stone.
    • Can also be used as a primer for silicone and emulsion paints and resin plasters.
    • Suitable for interior and exterior use.
    SKUDescriptionUnits
    800/08/062 Home & Dry® - Masonry & Brick Repellent 1 Litres
    800/05/072 Home & Dry® - Masonry & Brick Repellent 5 Litres

    Marble, Granite & Travertine Sealer

    FEATURES

    • Stoneshield Marble, Granite & Travertine Sealer is a premium quality solvent-based penetrating, no-sheen, no surface film, natural look water and oil repellent for maximum stain protection.
    • Allows water vapour transmission.

    USES

    • Can be used as a pre-grouting sealer on clean surfaces at least 6 hours before grouting. Suitable on low porosity tiles including polished, honed, tumbled and natural marble, travertine, granite, limestone and other natural stone.
    • Interior and exterior use.
    SKUDescriptionUnits
    800/02/051 Marble, Granite & Travertine Sealer 1 Litres
    800/02/068 Marble, Granite & Travertine Sealer 5 Litres

    Penetrating-sealer™ Natural-look

    FEATURES

    • Stoneshield Penetrating-Sealer™ Natural-Look is an economical solvent-based, penetrating, natural look, no-sheen, no surface- film, water repellent for general stain protection.
    • Allows water vapour transmission.

    USES

    • Can be used as a pre-sealer on to clean surfaces at least 6 hours before grouting.
    • Suitable on low porosity natural stone tiles including marble, travertine, granite, porcelain, limestone, quartzite, cement pavers, masonry surfaces, low porosity terracotta, quarry tiles, vitrified and unglazed ceramics.
    • For interior and exterior use
    SKUDescriptionUnits
    800/02/099 Penetrating-sealer™ Natural-look 1 Litres
    800/03/005 Penetrating-sealer™ Natural-look 5 Litres

    H2o Seal & Shine™

    FEATURES

    • Stoneshield H2O Seal & Shine™ is a superior quality natural look, non-yellowing water-based resin sealer that provides a protective surface shine, good stain resistance and ease of cleaning.
    • Seals and shines in one step.

    USES

    • Suitable on limestone, sandstone, slate, quartzite, cement tiles, terracotta, terrazzo and oxided concrete.
    • For interior and exterior use.
    SKUDescriptionUnits
    800/04/097 H2o Seal & Shine™ 1 Litres
    800/05/003 H2o Seal & Shine™ 5 Litres
    800/05/004 H2o Seal & Shine™ 25 Litres

    Sandstone-sealer

    FEATURES

    • Stoneshield Sandstone-Sealer is a superior quality natural look, non-yellowing water-based resin sealer that provides a protective surface sheen, good stain resistance and ease of cleaning.

    USES

    • Suitable on natural, tumbled and honed sandstone, limestone and similar natural stone.
    • Interior and exterior use.
    SKUDescriptionUnits
    800/00/008 Sandstone-sealer 1 Litres
    800/00/015 Sandstone-sealer 5 Litres

    Premium-plus™

    FEATURES

    • Stoneshield Premium-Plus™ is a premium quality, non-yellowing, high-solids solvent-based twin pack polyurethane sealer.
    • Provides ultimate stain and surface protection.
    • Colour enhances and provides a high gloss finish.

    USES

    • Suitable on high porosity tiles including terracotta, slate, sandstone, natural stone, cement tiles, natural and pigmented, concrete, oxide and grano-screeds.
    • Interior use only.
    SKUDescriptionUnits
    800/03/091 Premium-plus™ 5 Litres

    Protecta-plus™

    FEATURES

    • Stoneshield Protecta-Plus™ is a premium quality, non-yellowing, penetrating, solvent-based twin pack polyurethane sealer.
    • Provides excellent stain and surface protection.
    • Colour enhances and provides a satin sheen finish.

    USES

    • Suitable on low to medium porosity tiles including slate, low to medium porosity terracotta, unglazed ceramics and quartzite; honed, natural and tumbled marble and travertine; flamed granite and split tiles.
    • Interior use only.
    SKUDescriptionUnits
    800/06/071 Protecta-plus™ 1 Litres
    800/06/088 Protecta-plus™ 5 Litres

    Cement-sealer

    FEATURES

    • Stoneshield Cement-Sealer is a premium quality, non-yellowing, penetrating, solvent-based resin sealer that provides superior stain and surface protection.
    • Colour enhancing satin “wet look” finish.

    USES

    • Suitable on natural and oxided cement floors, imprint paving, cement tiles, pavers and cobbles. Also suitable for low traffic and domestic concrete floors.
    • For interior and exterior use.
    SKUDescriptionUnits
    800/04/035 Cement-sealer 1 Litres
    800/04/042 Cement-sealer 5 Litres

    Quarri-seal®

    FEATURES

    • Stoneshield Quarri-Seal® is a premium quality, non-yellowing solvent-based resin sealer that provides a satin finish, superior stain resistance and surface protection.
    • A penetrating sealer that colour enhances.

    USES

    • Suitable on low, medium and high porosity tiles including terracotta, slate, slasto, sandstone, cement tiles and pavers, oxided cement floors, terrazzo, natural stone and quarry tiles.
    • Interior and exterior use
    SKUDescriptionUnits
    800/03/067 Quarri-seal® 1 Litres
    800/03/074 Quarri-seal® 5 Litres
    800/03/075 Quarri-seal® 25 Litres

    Quarri-seal® Matt

    FEATURES

    • Stoneshield Quarri-Seal® Matt is a premium quality, non-yellowing solvent-based resin sealer that provides a satin finish, superior stain resistance and surface protection.
    • A penetrating sealer that colour enhances.

    USES

    • Suitable on low to medium porosity tiles, including terracotta, slate, sandstone, cement tiles and pavers, oxided cement floors, terrazzo, natural stone and quarry tiles.
    • Interior and exterior use.
    SKUDescriptionUnits
    800/03/012 Quarri-seal® Matt 1 Litres
    800/03/029 Quarri-seal® Matt 5 Litres
    800/03/030 Quarri-seal® Matt 25 Litres

    Non-skid Additive

    FEATURES

    • Stoneshield Non-Skid Additive is supplied in powder form to be added to a sealer prior to application.
    • Unit size supplied for a 5 litre unit of sealer.

    USES

    • To provide a light non-skid finish to surfaces that require sealing.
    • Must be added to a Stoneshield sealer prior to application.
    • Works best with solvent-based resin sealers.
    SKUDescriptionUnits
    800/06/071 Non-skid Additive 1 Litre

    Stripp-off™

    FEATURES

    • Stoneshield Stripp-Off™ is a solvent-based multi-purpose stripper for the removal of most sealers, adhesives, varnishes and paint.
    • Specifically formulated for easy water clean-up.

    USES

    • Suitable for use on natural stone, marble, granite, slate, terrazzo, terracotta, bricks, glazed and unglazed ceramics.
    • Suitable for use on most floor finishes.
    • Do not use on resin based synthetic surfaces including vinyl tiles, reconstituted marble and epoxy terrazzo.
    SKUDescriptionUnits
    800/03/050 Stripp-off™ 1 Litres
    800/06/095 Stripp-off™ 5 Litres
    800/06/096 Stripp-off™ 25 Litres

    Wax-off™

    FEATURES

    • Stoneshield Wax-Off™ is a concentrated water-based non- ammoniated stripper for the removal of waxes and polishers.

    USES

    • Suitable for use on natural stone, marble, granite, travertine, limestone, slate, terrazzo, terracotta, bricks, cement tiles, glazed and unglazed ceramics, vinyl and plastic floor tiles.
    SKUDescriptionUnits
    800/07/025 Wax-off™ 1 Litres
    800/07/032 Wax-off™ 5 Litres
    800/07/033 Wax-off™ 25 Litres

    Granite Polishing Powder

    FEATURES

    • Stoneshield Granite Polishing Powder is a two-part product consisting of a powder and liquid, formulated specifically to create a high gloss finish on granite.
    • Stoneshield Granite Polishing Powder is designed to remove light scratches and uneven wear patterns.
    • Sold in kit form.

    USES

    • To be used on granite for maintenance to maintain the factory gloss or for the restoration and re-polishing of dull granite surfaces.
    • Can be used for bull-nosing and difficult to polish areas.
    • Use on countertops, floors, vanities etc.
    SKUDescriptionUnits
    800/03/080 Granite Polishing Powder 1 Kg
    Granite Polishing Powder 1 Litres

    Marble Base Crystalliser

    FEATURES

    • Stoneshield Marble Base Crystalliser is a specially formulated machine applied penetrating hardener & densifier, designed to protect and harden the surface of marble, travertine, limestone and terrazzo.
    • Reduces surface porosity and improves wear resistance.
    • For internal and external use.

    USES

    • Suitable on unpolished, honed & natural stone where a gloss finish is not desired.
    • Best used first where a penetrating repellent is to be used as a sealer.
    SKUDescriptionUnits
    800/03/099 Marble Base Crystalliser 5 Litres

    Marble Crystalliser

    FEATURES

    • Stoneshield Marble Crystaliser is a specially formulated machine buff-able polish for maintaining and protecting the surface shine of polished marble, travertine and limestone.

    USES

    • Also effective for restoration of dull and lightly worn marble and travertine when used in conjunction with STONESHIELD MARBLE POLISHING POWDER.
    • Suitable on polished marble, travertine and limestone.
    • For interior use only.
    SKUDescriptionUnits
    800/03/081 Marble Crystaliser 500ml
    800/03/098 Marble Crystaliser 5 Litres

    Marble Polishing Powder

    FEATURES

    • Stoneshield Marble Polishing Powder is an acidic polishing powder designed to remove light surface scratches and uneven wear patterns, to create an even high-gloss polished surface finish.
    • The polished surface is now ready to be crystallised or sealed.

    USES

    • Suitable on polished marble, travertine and limestone and cement-based terrazzo.
    SKUDescriptionUnits
    800/06/019 Coloured Marble Polishing Powder 1 Kg
    800/06/026 Coloured Marble Polishing Powder 5 Kg
    800/06/027 Black & Green Marble Polishing Powder 1 Kg
    800/06/028 White Marble Polishing Powder 1 Kg

    Marble Honing Powder

    FEATURES

    • Stoneshield Marble Honing Powder is a non-acidic honing powder designed to remove light surface scratches and uneven wear patterns, to create an even honed surface finish.
    • The honed surface is now ready to be re-polished or sealed.

    USES

    • Suitable on marble, travertine and limestone.
    SKUDescriptionUnits
    800/05/096 Marble Honing Powder 1 Kg
    800/06/002 Marble Honing Powder 5 Kg

    Marble Glue

    FEATURES

    • Stoneshield Marble Glue is a polyester adhesive glue and filler for marble, granite, travertine, natural & engineered stone.
    • Low filler content for easy filling of cracks, cavities and holes in natural stone & travertine tiles and slabs.

    USES

    • Used for glueing and filling of all types of marble, granite, travertine, natural & engineered stone
    SKUDescriptionUnits
    800/06/032 Black Marble Glue Pigment 50 ml
    800/06/035 Beige Marble Glue Pigment 50 ml
    800/06/034 Brown Marble Glue Pigment 50 ml
    800/06/031 Hardener 80 ml
    800/06/030 Beige Marble Glue 6 Kg
    800/06/029 White Marble Glue 6 Kg
    800/06/036 Black Marble Glue 6 Kg
    800/06/037 Grey Marble Glue 6 Kg

    Protect & Shine™

    FEATURES

    • Stoneshield Protect & Shine™ is a high quality self-shine polymer polish for regular maintenance, used to provide a protective high-shine surface finish.

    USES

    • Provides the best results when applied to already sealed natural stone, marble, travertine, limestone, slate, terracotta, unglazed ceramics, cement and vinyl tiles. Can be applied over most Stoneshield sealers. Can be used as a pre-sealer prior to grouting on polished porcelain and textured ceramic tiles.
    • For interior use only.
    SKUDescriptionUnits
    800/06/057 Protect & Shine™ 1 Litres
    800/06/064 Protect & Shine™ 5 Litres
    800/06/065 Protect & Shine™ 25 Litres

    Surface-protector™ Matt Finish

    FEATURES

    • Stoneshield Surface-Protector™ Matt Finish is a high quality matt finish polymer polish for regular maintenance, used to provide a protective matt surface finish.

    USES

    • Provides the best results when applied to already sealed natural stone, marble, travertine, limestone, slate, terracotta, unglazed ceramics, cement and vinyl tiles.
    • Stoneshield Surface-Protector™ Matt can be applied over most Stoneshield sealers.
    • For interior use only.
    SKUDescriptionUnits
    800/08/000 Surface-protector™ Matt Finish 1 Litres
    800/08/017 Surface-protector™ Matt Finish 5 Litres