blades Archives | FloorsHQ

TURBO CUTTING BLADES – D.I.Y. (COLD PRESSED)

FEATURES

Turbo blades combine the advantages of segmented & continuous blades.
Blades provide rapid stock removal with reduced edge chipping.
Cold pressed, entry level, general purpose quality blade.

USES

For the cutting of marble, granite, concrete, masonry, bricks and tiles.
For use with standard angle grinders and joint cutters.

SEGMENTED CUTTING BLADES – D.I.Y. (COLD PRESSED)

Segmented blades offer the fastest cutting speeds for the lowest cost.

FEATURES

Segmented blades offer the fastest cutting speeds for the lowest cost.
Blades should be used where the quickest stock removal is required, but cutting quality is less important (chipped edges).
Cold pressed, entry level, general purpose quality blade.

USES

For the cutting of concrete, bricks, blocks, roof tiles, paving stones and blocks.
For use with standard angle grinders and joint cutters.

SEGMENTED CUTTING BLADES – CONTRACTOR (HOT PRESSED)

FEATURES

Segmented blades offer the fastest cutting speeds for the lowest cost.
Blades should be used where the quickest stock removal is required, but cutting quality is less important (chipped edges).
Hot pressed, contractor quality blade.
Offers longer life, faster cutting and lower cost per metre.

USES

For the cutting of concrete, bricks, blocks, roof tiles, paving stones and blocks.
For use with standard angle grinders and joint cutters.

SEGMENTED CUTTING BLADES – PROFESSIONAL (LASER WELDED)

Segmented blades offer the fastest cutting speeds for the lowest cost.

FEATURES

Segmented blades offer the fastest cutting speeds for the lowest cost.
Blades should be used where the quickest stock removal is required but cutting quality is less important (chipped edges).
Laser welded, professional quality blade.
Offers longest life, faster cutting and lower cost per metre.

USES

For the cutting of new and existing concrete, asphalt, bricks, blocks, and paving stones.
For use with power saws and concrete wet saws

CONTINUOUS CUTTING BLADES – CONTRACTOR (HOT PRESSED)

Continuous blades offer the slowest most accurate cutting speeds for the lowest cost.

FEATURES

Continuous blades offer the slowest most accurate cutting speeds for the lowest cost.
Should be used where accurate, smooth and chip free cutting is required.
Hot pressed, contractor quality blade.
Offers longer life, faster cutting and lower cost per metre.

USES

For the cutting of ceramic & porcelain tiles, glass, stone, and precision cutting of marble and granite.
For use with standard angle grinders and tile saws.

CRACK CHASING BLADE – PROFESSIONAL

V -shaped segmented diamond cutting blade.

FEATURES

V-shaped segmented diamond cutting blade.
For use on a 125 mm angle grinder.
Should be used with a dust extraction cover.

USES

Designed specifically for crack chasing in concrete floors.
Blade is designed to create a V-shaped reservoir to aid filling.
For use on a 125 mm angle grinder.

TUCK POINT BLADE – CONTRACTOR

Consists of two fused segmented blades.

FEATURES

Consists of two fused segmented blades.
Safer design than stacked blades.

USES

For the removal of mortar joints between brick work.
For grout removal between tiles and for cutting wider joints in concrete.
For use on a 125 mm angle grinder.

TURBO SEGMENTED GRINDING CUPS – PROFESSIONAL (SILVER BRAZED)

Diamond grinding cup - segmented turbo pattern.

FEATURES

Diamond grinding cup – segmented turbo pattern.
Very fast, aggressive cutting action.
Segment size – 24 x 8 x 8 mm
Available for very hard concrete (colour – BLACK).
Available for soft, abrasive concrete (colour – RED)

USES

For grinding of concrete and masonry surfaces.
For the removal of surface coatings, epoxy, glue, mastic, paint and floor coverings.
180 mm cups to be used on 180 mm angle grinders.
125 mm cups to be used on 125 mm angle grinders.
125 mm and 180 mm cups can be used on ROX® Falcon floor grinders.

DOUBLE ROW SEGMENTED GRINDING CUPS – PROFESSIONAL (SILVER BRAZED)

FEATURES

Specifically designed to fit the ROX® CEG 125 concrete edge grinder.
Diamond grinding cup – double row segmented pattern.
Very fast, aggressive cutting action.
Available for very hard concrete (colour – BLACK).
Available for soft, abrasive concrete (colour – RED).

USES

For grinding of concrete and masonry surfaces.
For the removal of surface coatings, epoxy, glue, mastic, paint and floor coverings.
180 mm cups to be used on 180 mm angle grinders.

TURBO SEGMENTED GRINDING CUPS – PROFESSIONAL (SILVER BRAZED)

FEATURES

Diamond grinding cup – segmented turbo pattern.
Very fast, aggressive cutting action.
Available for soft, abrasive concrete

USES

For grinding of concrete, masonry and terrazzo surfaces.
For the removal of surface coatings, epoxy, glue, mastic, paint and floor coverings.
150 mm cups to be used on 150mm angle grinders and edge grinders.

CONTINUOUS GRINDING CUPS – CONTRACTOR

Continuous Grinding Cups Contractor - Diamond Products. For smoother and slower grinding. Suitable for marble, stone, epoxy and concrete.

FEATURES

Diamond grinding cup – sintered.
For smoother and slower grinding.
Available for very soft, abrasive materials (colour – RED).

USES

Suitable for marble, stone, epoxy and concrete.
For shaping & profiling of stone slab edges.
For removing surface imperfections and light grinding.
Use on 125 mm angle grinders & variable speed polishers.
Use on ROX floor grinders for epoxy sanding and light grinding.

Tungsten Carbide Cups

FEATURES

Tungsten carbide chunks outlast & are far more effective than silicon carbide wheels.
They will not clog, load up or smear the coating.
Great for ripping through abrasive and sticky materials.

USES

Removing of surface coatings such as mastic, epoxy, paint, glue & rubber.
Extremely effective for removing plaster, gypsum & mortar on concrete floors.
Won’t damage or gouge structurally sound surfaces during use.
For use on 125 mm angle grinders and ROX® Falcon floor grinders

PCD Diamond Grinding Cups

Grinding Cups PCD’s will not clog load up or smear the coating - Floors HQ

FEATURES

Unlike standard diamond grinding discs, PCD’s will not clog, load up or smear the coating.
The PCD segment scrapes and rips the coating from the surface rather than grinding it away.
PCD segments produce much faster results with less heat build-up and clogging.

USES

PCD grinding cups are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
For thinner coating removal from 200 microns up to 2 mm thick.

PCD Diamond Grinding Cups

PCD grinding cups are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.

FEATURES

Unlike standard diamond grinding disks, PCD’s will not clog, load up or smear the coating.
The PCD segment scrapes and rips the coating from the surface rather than grinding it away.
PCD segments produce much faster results with less heat build-up and clogging.

USES

PCD grinding cups are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
For thicker coating removal from 1 mm to 4 mm thick.

Single 1/2 Pcd Diamond Segments

PCD grinding cups are extremely effective for the removal of ﬁbreglass linings, pool coatings, waterprooﬁng membranes, carpet and vinyl adhesives.

FEATURES

Unlike standard diamond grinding discs, PCD’s will not clog, load up or smear the coating.
The PCD segments scrape and rip the coating from the surface rather than grinding it away.
PCD segments produce much faster results with less heat build-up and clogging.
For machines with left rotation.

USES

PCD grinding discs are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
n Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
For thicker coating removal from 1 mm to 4 mm thick.

Double 1/4 Pcd Diamond Segments

Double Pcd Diamond Segments

FEATURES

Unlike standard diamond grinding discs, PCD’s will not clog, load up or smear the coating.
The PCD segments scrape and rip the coating from the surface rather than grinding it away.
PCD segments produce much faster results with less heat build-up and clogging.
For machines with left rotation.

USES

PCD grinding discs are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
For thicker coating removal from 200 mic up to 2 mm.

Round Metal Grinding Discs

Round Metal Grinding Discs - For grinding and shaping stone

FEATURES

Multiple attachment methods – Velcro backing, 1 central threaded hole and 3 satellite threaded holes.
Less aggressive scratch pattern due to surface area and design.
Available in extremely aggressive grits.
75 mm x 10 mm thick for long life grinding disc.

USES

Can be used on floor grinding machines, radial line polishers.
Used for grinding and shaping stone and concrete surfaces.

Diamond Grinding Plate – 250 Mm

Diamond Grinding Plate - 250 Mm

FEATURES

Specifically designed to fit the ROX® Falcon 250 concrete grinder.
For single head 250 mm floor grinders.
Soft, medium & hard bond available.
For use on concrete & stone.
40 x 10 x 10 mm segments for longer life.

USES

Used to grind concrete, screeds & asphalt.
Used for surface prep, coating & paint & glue removal.
Used to reduce high spots & flatten floors.

Diamond Grinding Wedge (Errut Block)

Diamond Grinding Wedge (Errut Block)

FEATURES

Enlarged, value for money diamond segments.
Diamond wedges cut far quicker and last much longer than standard silicon carbide errut blocks and smaller diamond segments.
Generally sold in sets of 3.
40 x 10 x 10 mm segments for extra life.

USES

Used for grinding concrete surfaces and floors.
Designed to fit all standard errut floor grinding machines.

Trapezoid 2 X Rectangular Segments (Metal Bond)

Metal Grinding Segment - Use on any ﬂoor grinder - Floors HQ

FEATURES

Fits any standard 3-hole configured adaptor plate.
3 threaded holes.
40 x 10 x 10 mm segments for longer life.

USES

Use on any floor grinder or concrete grinder with a suitable adaptor plate.
Used on all floor grinders with magnetic or non-magnetic adaptor plates.
For the grinding & polishing of concrete & terrazzo floors.

Ezzee™ Attach 2 X Rectangular Segments (Metal Bond)

Metal Grinding Segment

FEATURES

Contractor quality for fast and efficient results.
Designed for dry polishing & grinding concrete.
Metal bond diamond pads for stock removal and stone exposure.
Colour coded metal backing for easy identification.
40 x 12 x 12 segments for extra life.

USES

Designed for grinding concrete – terrazzo, granite, marble & travertine.
Can be used on both light and heavy floor grinding machines.

Ceramic Transition Diamond Pads

Metal Grinding Disc

FEATURES

Ceramic transition pads remove the heavy scratch pattern of metal bond discs and allow for easy transition to the resin bond pads.
Ceramic transition pads are the most heat tolerant of all the hybrids.

USES

Ceramic pads to be used between metal bond and resin bond grinding pads.
Use between 50 grit metal and 200 grit resin. Use wet or dry.

Ezzee™ Attach 2 X Rectangular Segments (Metal Bond)

Metal Grinding Segment

FEATURES

Contractor quality for fast and efficient results.
Designed for dry concrete polishing.
Colour coded metal backing for easy identification.
40 x 12 x 12 mm segments for extra life.

USES

Designed for grinding concrete, terrazzo, granite, marble & travertine.
Can be used on both light and heavy floor grinding machines.