You are here:Home|blades

    Turbo Cutting Blades – D.i.y. (Cold Pressed)

    FEATURES

    • Turbo blades combine the advantages of segmented & continuous blades.
    • Blades provide rapid stock removal with reduced edge chipping.
    • Cold pressed, entry level, general purpose quality blade.

    USES

    • For the cutting of marble, granite, concrete, masonry, bricks and tiles.
    • For use with standard angle grinders and joint cutters.
    SKU Description Units
    80/1/020 Turbo Cutting Blades - D.i.y. (Cold Pressed) 115 mm
    80/1/120 Turbo Cutting Blades - D.i.y. (Cold Pressed) 125 mm
    80/1/420 Turbo Cutting Blades - D.i.y. (Cold Pressed) 230 mm

    Segmented Cutting Blades – D.i.y. (Cold Pressed)

    FEATURES

    • Segmented blades offer the fastest cutting speeds for the lowest cost.
    • Blades should be used where the quickest stock removal is required, but cutting quality is less important (chipped edges).
    • Cold pressed, entry level, general purpose quality blade.

    USES

    • For the cutting of concrete, bricks, blocks, roof tiles, paving stones and blocks.
    • For use with standard angle grinders and joint cutters.
    SKU Description Units
    80/2/020 Segmented Cutting Blade 125 mm
    80/2/420 Segmented Cutting Blade 230mm

    Segmented Cutting Blades – Contractor (Hot Pressed)

    FEATURES

    • Segmented blades offer the fastest cutting speeds for the lowest cost.
    • Blades should be used where the quickest stock removal is required, but cutting quality is less important (chipped edges).
    • Hot pressed, contractor quality blade.
    • Offers longer life, faster cutting and lower cost per metre.

    USES

    • For the cutting of concrete, bricks, blocks, roof tiles, paving stones and blocks.
    • For use with standard angle grinders and joint cutters.
    SKU Description Units
    80/2/422 Segmented Cutting Blade 230mm

    Segmented Cutting Blades – Professional (Laser Welded)

    FEATURES

    • Segmented blades offer the fastest cutting speeds for the lowest cost.
    • Blades should be used where the quickest stock removal is required but cutting quality is less important (chipped edges).
    • Laser welded, professional quality blade.
    • Offers longest life, faster cutting and lower cost per metre.

    USES

    • For the cutting of new and existing concrete, asphalt, bricks, blocks, and paving stones.
    • For use with power saws and concrete wet saws
    SKU Description Units
    80/7/010 Turbo Segmented Blade - (Brown Concrete) 350 mm
    80/7/020 Turbo Segmented Blade - (Asphalt/green Con) 350 mm
    80/7/030 Turbo Segmented Blade - (Green Concrete) 350 mm

    Continuous Cutting Blades – Contractor (Hot Pressed)

    FEATURES

    • Continuous blades offer the slowest most accurate cutting speeds for the lowest cost.
    • Should be used where accurate, smooth and chip free cutting is required.
    • Hot pressed, contractor quality blade.
    • Offers longer life, faster cutting and lower cost per metre.

    USES

    • For the cutting of ceramic & porcelain tiles, glass, stone, and precision cutting of marble and granite.
    • For use with standard angle grinders and tile saws
    SKU Description Units
    80/6/010 Continuous Cutting Blade 115 mm
    80/6/110 Continuous Cutting Blade 200 mm

    Crack Chasing Blade – Professional

    FEATURES

    • V -shaped segmented diamond cutting blade.
    • For use on a 125 mm angle grinder.
    • Should be used with a dust extraction cover.

    USES

    • Designed specifically for crack chasing in concrete floors.
    • Blade is designed to create a V- shaped reservoir to aid filling.
    • For use on a 125 mm angle grinder.
    SKU Description Units
    80/6/010 Continuous Cutting Blade 115 mm
    80/6/110 Continuous Cutting Blade 200 mm

    Tuck Point Blade – Contractor

    FEATURES

    • Consists of two fused segmented blades.
    • Safer design than stacked blades.

    USES

    • For the removal of mortar joints between brick work.
    • For grout removal between tiles and for cutting wider joints in concrete.
    • For use on a 125 mm angle grinder.
    SKU Description Units
    81/2/010 Tuck Point Blade - Double Segmented 125 mm

    Turbo Segmented Grinding Cups – Professional (Silver Brazed)

    FEATURES

    • Diamond grinding cup – segmented turbo pattern.
    • Very fast, aggressive cutting action.
    • Segment size – 24 x 8 x 8 mm
    • Available for very hard concrete (colour – BLACK).
    • Available for soft, abrasive concrete (colour – RED)

    USES

    • For grinding of concrete and masonry surfaces.
    • For the removal of surface coatings, epoxy, glue, mastic, paint and floor coverings.
    • 180 mm cups to be used on 180 mm angle grinders.
    • 125 mm cups to be used on 125 mm angle grinders.
    • 125 mm and 180 mm cups can be used on ROX® Falcon floor grinders.
    SKU Description Size Length Grit
    88/2/010 Aggressive Grinding / Coating Removal 125 mm Soft 16/18
    88/2/030 Aggressive Grinding / Coating Removal 125 mm Hard 16/18
    88/3/010 General Grinding / Surface Prep 125 mm Soft 30/35
    88/3/030 General Grinding / Surface Prep 125 mm Hard 30/35
    88/4/030 Medium Grinding / Medium Surface Prep 125 mm Hard 45/50
    88/5/020 Light Grinding For Thin Coatings 125 mm Hard 60/70
    88/2/110 Aggressive Grinding / Coating Removal 180 mm Soft 16/18
    88/3/110 General Grinding / Surface Prep 180 mm Soft 30/35
    88/3/310 General Grinding / Surface Prep 180 mm Hard 30/35
    88/5/210 Light Grinding For Thin Coatings 180 mm Medium 60/70

    Continuous Segmented Grinding Cups – Professional (Silver Brazed)

    FEATURES

    • Diamond grinding cup – segmented turbo pattern.
    • Very fast, aggressive cutting action.
    • Available for soft, abrasive concrete (colour – RED)

    USES

    • For grinding of concrete, masonry and terrazzo surfaces.
    • For the removal of surface coatings, epoxy, glue, mastic, paint and floor coverings.
    • 150 mm cups to be used on 150mm angle grinders and edge grinders.
    SKU Description Size Length Grit
    88/5/506 Continuous Grinding Cup 150 mm Soft 30
    88/5/515 Continuous Grinding Cup 150 mm Soft 80

    Continuous Grinding Cups – Contractor

    FEATURES

    • Diamond grinding cup – sintered.
    • For smoother and slower grinding.
    • Available for medium hardness materials (colour – SILVER).
    • Available for very soft, abrasive materials (colour – RED).

    USES

    • Suitable for marble, stone, epoxy and concrete.
    • For shaping & profiling of stone slab edges.
    • For removing surface imperfections and light grinding.
    • Use on 125 mm angle grinders & variable speed polishers.
    • Use on ROX floor grinders for epoxy sanding and light grinding.
    SKU Description Size Length Grit
    85/5/010 Continuous Grinding Cup 105 mm Soft 50/60
    85/6/010 Continuous Grinding Cup 105 mm Soft 80
    85/5/020 Continuous Grinding Cup 105 mm Medium 50/60

    Tungsten Carbide Cups

    FEATURES

    • Tungsten carbide chunks outlast & are far more effective than silicon carbide wheels.
    • They will not clog, load up or smear the coating.
    • Great for ripping through abrasive and sticky materials.

    USES

    • Removing of surface coatings such as mastic, epoxy, paint, glue & rubber.
    • Extremely effective for removing plaster, gypsum & mortar on concrete floors.
    • Won’t damage or gouge structurally sound surfaces during use.
    • For use on 125 mm angle grinders and ROX® Falcon floor grinders
    SKU Description Size Grit
    90/5/010 Tungsten Carbide Cup 125 mm 16
    95/0/011 Tungsten Carbide Disc 75 mm 16

    Pcd Grinding Cups

    FEATURES

    • Unlike standard diamond grinding discs, PCD’s will not clog, load up or smear the coating.
    • The PCD segment scrapes and rips the coating from the surface rather than grinding it away.
    • PCD segments produce much faster results with less heat build-up and clogging.

    USES

    • PCD grinding cups are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
    • Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
    • For thinner coating removal from 200 microns up to 2 mm thick.
    SKU Description Size
    90/4/010 Pcd Cup - 18 Small Pcd 4 X 3 X 3 Mm 180 mm

    Pcd Grinding Cups

    FEATURES

    • Unlike standard diamond grinding disks, PCD’s will not clog, load up or smear the coating.
    • The PCD segment scrapes and rips the coating from the surface rather than grinding it away.
    • PCD segments produce much faster results with less heat build-up and clogging.

    USES

    • PCD grinding cups are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
    • Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
    • For thicker coating removal from 1 mm to 4 mm thick.
    SKU Description Size
    90/4/110 Pcd Cup - 6 X 1/4 Pcd + 6 X Tct Rounds 180 mm

    Single 1/2 Pcd Diamond Segments

    FEATURES

    • Unlike standard diamond grinding discs, PCD’s will not clog, load up or smear the coating.
    • The PCD segments scrape and rip the coating from the surface rather than grinding it away.
    • PCD segments produce much faster results with less heat build-up and clogging.
    • For machines with right rotation.

    USES

    • PCD grinding discs are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
    • n Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
    • For thicker coating removal from 1 mm to 4 mm thick.
    SKU Description
    95/1/002 Single 1/2 Pcd 10 Mm - 30 Grit Round

    Double 1/4 Pcd Diamond Segments

    FEATURES

    • Unlike standard diamond grinding discs, PCD’s will not clog, load up or smear the coating.
    • The PCD segments scrape and rip the coating from the surface rather than grinding it away.
    • PCD segments produce much faster results with less heat build-up and clogging.
    • For machines with left rotation.

    USES

    • PCD grinding discs are designed for removing surface coatings including urethanes, epoxy, mastics, glues and rubber.
    • Extremely effective for the removal of fibreglass linings, pool coatings, waterproofing membranes, carpet and vinyl adhesives.
    • For thicker coating removal from 200 mic up to 2 mm.
    SKU Description
    95/1/004 Double 1/4 Pcd 10 Mm - 30 Grit Round

    Round Metal Grinding Discs

    FEATURES

    • Multiple attachment methods – Velcro backing, 1 central threaded hole and 3 satellite threaded holes.
    • Less aggressive scratch pattern due to surface area and design.
    • Available in extremely aggressive grits.
    • 75 mm x 10 mm thick for long life grinding disc.

    USES

    • Can be used on floor grinding machines, radial line polishers.
    • Used for grinding and shaping stone and concrete surfaces.
    SKU Description Grit Concrete Colour
    91/5/010 Metal Grinding Disc 6 Medium Blue
    91/3/011 Metal Grinding Disc 16 Hard Black
    91/5/011 Metal Grinding Disc 16 Medium Blue
    91/3/012 Metal Grinding Disc 30 Hard Black
    91/5/012 Metal Grinding Disc 30 Medium Blue
    91/7/012 Metal Grinding Disc 30 Soft Red
    91/3/013 Metal Grinding Disc 50 Hard Black
    91/5/013 Metal Grinding Disc 50 Medium Blue
    91/7/013 Metal Grinding Disc 50 Soft Red
    91/5/016 Metal Grinding Disc 120 Medium Blue
    91/5/018 Metal Grinding Disc 220 Medium Blue

    Diamond Grinding Plate – 250 Mm

    FEATURES

    • For single head 250 mm floor grinders.
    • Medium bond for general purpose grinding.
    • For use on concrete & stone.
    • 40 x 10 x 10 mm segments for longer life.

    USES

    • Used to grind concrete, screeds & asphalt.
    • Used for surface prep, coating & paint & glue removal.
    • Used to reduce high spots & flatten floors.
    SKU Description Grit Concrete Colour
    92/7/011 Diamond Grinding Plate - 250 Mm 30 Medium Blue

    Diamond Grinding Wedge (Errut Block)

    FEATURES

    • Enlarged, value for money diamond segments.
    • Diamond wedges cut far quicker and last much longer than standard silicon carbide errut blocks and smaller diamond segments.
    • Generally sold in sets of 3.
    • 40 x 10 x 10 mm segments for extra life.

    USES

    • Used for grinding concrete surfaces and floors.
    • Designed to fit all standard errut floor grinding machines.
    SKU Description Grit Concrete Colour
    92/4/014 Diamond Grinding Wedge 50 Medium Orange

    Ezzee™ Attach 2 X Rectangular Segments (Metal Bond)

    FEATURES

    • Contractor quality for fast and efficient results.
    • Designed for dry concrete polishing.
    • Colour coded metal backing for easy identification.
    • 40 x 12 x 12 mm segments for extra life.

    USES

    • Designed for grinding concrete – terrazzo, granite, marble & travertine.
    • Can be used on both light and heavy floor grinding machines
    SKU Description Grit Concrete Colour
    81/4/180 Metal Grinding Segment 30 Hard Black
    81/4/181 Metal Grinding Segment 50 Hard Black
    81/4/182 Metal Grinding Segment 100 Hard Black
    81/4/210 Metal Grinding Segment 30 Medium Blue
    81/4/211 Metal Grinding Segment 50 Medium Blue
    81/4/212 Metal Grinding Segment 100 Medium Blue
    81/4/310 Metal Grinding Segment 30 Soft Red
    81/4/311 Metal Grinding Segment 50 Soft Red
    81/4/312 Metal Grinding Segment 100 Soft Red

    Trapezoid 2 X Rectangular Segments (Metal Bond)

    FEATURES

    • Fits any standard 3-hole configured adaptor plate.
    • 3 threaded holes.
    • 40 x 10 x 10 mm segments for longer life.

    USES

    • Use on any floor grinder or concrete grinder with a suitable adaptor plate.
    • Used on all floor grinders with magnetic or non-magnetic adaptor plates.
    • For the grinding & polishing of concrete & terrazzo floors.
    SKU Description Grit Concrete Colour
    93/1/010 Metal Grinding Segment 6 XX - Hard Gold
    93/1/012 Metal Grinding Segment 30 XX - Hard Gold
    93/1/180 Metal Grinding Segment 30 Hard Black
    93/1/181 Metal Grinding Segment 50 Hard Black
    93/1/182 Metal Grinding Segment 100 Hard Black
    93/1/210 Metal Grinding Segment 30 Medium Blue
    93/1/211 Metal Grinding Segment 50 Medium Blue
    93/1/212 Metal Grinding Segment 100 Medium Blue
    93/1/310 Metal Grinding Segment 30 Soft Red
    93/1/311 Metal Grinding Segment 50 Soft Red
    93/1/312 Metal Grinding Segment 100 Soft Red

    Ezzee™ Attach 2 X Rectangular Segments (Metal Bond)

    FEATURES

    • Contractor quality for fast and efficient results.
    • Designed for dry polishing & grinding concrete.
    • Metal bond diamond pads for stock removal and stone exposure.
    • Colour coded metal backing for easy identification.
    • 40 x 12 x 12 segments for extra life.

    USES

    • Designed for grinding concrete – terrazzo, granite, marble & travertine.
    • Can be used on both light and heavy floor grinding machines.
    SKU Description Grit Concrete Colour
    81/3/180 Metal Grinding Segment 30 Hard Black
    81/3/181 Metal Grinding Segment 50 Hard Black
    81/3/182 Metal Grinding Segment 100 Hard Black
    81/3/210 Metal Grinding Segment 30 Medium Blue
    81/3/211 Metal Grinding Segment 50 Medium Blue
    81/3/212 Metal Grinding Segment 100 Medium Blue
    81/3/310 Metal Grinding Segment 30 Soft Red
    81/3/311 Metal Grinding Segment 50 Soft Red
    81/3/312 Metal Grinding Segment 100 Soft Red

    Ceramic Transition Pads (Concrete)

    FEATURES

    • Ceramic transition pads remove the heavy scratch pattern of metal bond discs and allow for easy transition to the resin bond pads.
    • Ceramic transition pads are the most heat tolerant of all the hybrids.

    USES

    • Ceramic pads to be used between metal bond and resin bond grinding pads.
    • Use between 50 grit metal and 200 grit resin.
    • Use wet or dry.
    SKU Description Size Grit
    91/5/010 Metal Grinding Disc 75 mm x 10 mm 100

    Ezzee™ Attach 2 X Rectangular Segments (Metal Bond)

    FEATURES

    • Contractor quality for fast and efficient results.
    • Designed for dry concrete polishing.
    • Colour coded metal backing for easy identification.
    • 40 x 12 x 12 mm segments for extra life.

    USES

    • Designed for grinding concrete – terrazzo, granite, marble & travertine.
    • Can be used on both light and heavy floor grinding machines
    SKU Description Grit Concrete Colour
    81/5/181 Metal Grinding Segment 30 Hard Black
    81/5/182 Metal Grinding Segment 50 Hard Black
    81/5/182 Metal Grinding Segment 100 Hard Black
    81/5/210 Metal Grinding Segment 30 Medium Blue
    81/5/211 Metal Grinding Segment 50 Medium Blue
    81/5/212 Metal Grinding Segment 100 Medium Blue
    81/5/310 Metal Grinding Segment 30 Soft Red
    81/5/311 Metal Grinding Segment 50 Soft Red
    81/5/312 Metal Grinding Segment 100 Soft Red