ROX® GAUGING RAKES – CONTRACTOR RANGE

SKU: N/A Category:

FEATURES

  • Manufactured from abrasion resistant stainless steel.
  • Precision engineered angled blade to keep the rake at 90 degrees during use – keeping material thickness constant.
  • Gauging rake pulls 40% of the actual V-notch size.
  • Required sizing details in the table below.

USES

  • Used to accurately spread self-smoothing and self-levelling systems.
  • Used to apply self-levelling epoxy & urethane flooring systems.
  • Used to apply self-levelling cement screeds & self-levelling cement systems.
  • Most commonly used to apply self-levelling systems between 500 microns and 4 mm.

Available Options

SKUDescriptionCodeDimensionsWeightQuantity 
31/1/10131/1/101N/AN/A
31/1/10231/1/102N/AN/A
31/1/10331/1/103N/AN/A
31/1/10431/1/104N/AN/A
31/1/10531/1/105N/AN/A
31/1/10631/1/106N/AN/A
31/1/10731/1/107N/AN/A
31/1/10831/1/108N/AN/A
31/1/10931/1/109N/AN/A
31/1/11031/1/110N/AN/A
31/1/11131/1/111N/AN/A
31/1/11231/1/112N/AN/A

 

Code Description Rake Size Materials Spread Rate
31/1/101 GAUGING RAKE – (self-levelling) 600 mm x 1.2 mm S / STEEL 500 mic
31/1/102 GAUGING RAKE – (self-levelling) 600 mm x 1.5 mm S / STEEL 600 mic
31/1/103 GAUGING RAKE – (self-levelling) 600 mm x 2 mm S / STEEL 800 mic
31/1/104 GAUGING RAKE – (self-levelling) 600 mm x 2.5 mm S / STEEL 1.0 mm
31/1/105 GAUGING RAKE – (self-levelling) 600 mm x 3 mm S / STEEL 1.2 mm
31/1/106 GAUGING RAKE – (self-levelling) 600 mm x 4 mm S / STEEL 1.6 mm
31/1/107 GAUGING RAKE – (self-levelling) 600 mm x 5 mm S / STEEL 2.0 mm
31/1/108 GAUGING RAKE – (self-levelling) 600 mm x 6 mm S / STEEL 2.4 mm
31/1/109 GAUGING RAKE – (self-levelling) 600 mm x 7 mm S / STEEL 2.8 mm
31/1/110 GAUGING RAKE – (self-levelling) 600 mm x 8 mm S / STEEL 3.2 mm
31/1/111 GAUGING RAKE – (self-levelling) 600 mm x 9 mm S / STEEL 3.6 mm
31/1/112 GAUGING RAKE – (self-levelling) 600 mm x 10 mm S / STEEL 4.0 mm