ROX® GAUGING RAKES

FEATURES

  • Manufactured from abrasion resistant stainless steel.
  • Precision engineered angled blade to keep the rake at 90 degrees during use – keeping material thickness constant.
  • Gauging rake pulls 40% of the actual V-notch size.
  • Required sizing details in the table below.

USES

  • Used to accurately spread self-smoothing and self-levelling systems.
  • Used to apply self-levelling epoxy & urethane flooring systems.
  • Used to apply self-levelling cement screeds & self-levelling cement systems.
  • Most commonly used to apply self-levelling systems between 500 microns and 4 mm.

Available Options

SKUDescriptionCodeDimensionsWeightQuantity 
31/1/001Gauging Rake31/1/001N/AN/A
31/1/002Gauging Rake31/1/002N/AN/A
31/1/003Gauging Rake 31/1/003N/AN/A
31/1/004Gauging Rake31/1/004N/AN/A
31/1/005Gauging Rake31/1/005N/AN/A
31/1/006Gauging Rake31/1/006N/AN/A
31/1/007Gauging Rake31/1/007N/AN/A
31/1/008Gauging Rake31/1/008N/AN/A
31/1/009Gauging Rake31/1/009N/AN/A
31/1/010Gauging Rake31/1/010N/AN/A
31/1/011Gauging Rake31/1/011N/AN/A
31/1/012Gauging Rake31/1/012N/AN/A

Code Description Rake Size  Materials  Spread Rate
31/1/001 GAUGING RAKE – (self-levelling) 600 mm x 1.2 mm  S/Steel  500 mic
31/1/002 GAUGING RAKE – (self-levelling) 600 mm x 1.5 mm  S/Steel  600 mic
31/1/003 GAUGING RAKE – (self-levelling) 600 mm x 2 mm  S/Steel  800 mic
31/1/004 GAUGING RAKE – (self-levelling) 600 mm x 2.5 mm  S/Steel  1.0 mm
31/1/005 GAUGING RAKE – (self-levelling) 600 mm x 3 mm  S/Steel  1.2 mm
31/1/006 GAUGING RAKE – (self-levelling) 600 mm x 4 mm  S/Steel  1.6 mm
31/1/007 GAUGING RAKE – (self-levelling) 600 mm x 5 mm  S/Steel  2.0 mm
31/1/008 GAUGING RAKE – (self-levelling) 600 mm x 6 mm  S/Steel  2.4 mm
31/1/009 GAUGING RAKE – (self-levelling) 600 mm x 7 mm  S/Steel  2.8 mm
31/1/010 GAUGING RAKE – (self-levelling) 600 mm x 8 mm  S/Steel  3.2 mm
31/1/011 GAUGING RAKE – (self-levelling) 600 mm x 9 mm  S/Steel  3.6 mm
31/1/012 GAUGING RAKE – (self-levelling) 600 mm x 10 mm  S/Steel  4.0 mm