Single 1/2 PCD Diamond Segments for Thick Coating Removal
R674.48
Single 1/2 PCD Diamond Segments are professional coating-removal segments designed for aggressive removal of thick floor coatings from concrete and other suitable hard surfaces.
Unlike conventional diamond segments that primarily grind material away, PCD segments scrape and rip coatings from the surface. This makes PCD tooling particularly effective when removing thick, sticky or difficult coatings that can clog, load or smear conventional diamond tooling.
The FloorsHQ Single 1/2 PCD segment is a 10 mm round segment with 30-grit specification, designed for machines with right rotation and intended for thicker coating removal applications from approximately 1 mm to 4 mm.
| Code | Description |
|---|---|
| 95/1/002 | SINGLE ½ PCD 10 mm – 30 GRIT ROUND |
A PCD diamond segment is a specialised coating-removal component made using Polycrystalline Diamond (PCD). It is designed to aggressively remove bonded surface coatings rather than simply grinding the coating into dust.
PCD segments mechanically scrape and rip coatings from the substrate. This makes them particularly useful for thick epoxy, urethane, adhesive, mastic, rubber and other difficult floor coatings.
PCD segments are commonly incorporated into grinding discs, cups and other floor-preparation tooling where aggressive coating removal is required.
- Single 1/2 PCD segment configuration
- 10 mm round segment
- 30-grit specification
- Designed for right-rotation machines
- Designed for aggressive coating removal
- Scrapes and rips coatings rather than simply grinding them
- Helps reduce clogging and loading when removing suitable coatings
- Designed for thicker coatings from approximately 1 mm to 4 mm
- Suitable for professional floor-preparation applications
- Replacement component for compatible PCD grinding tooling
- Thick epoxy coating removal
- Urethane coating removal
- Mastic removal
- Glue and adhesive removal
- Rubber coating removal
- Fibreglass lining removal
- Pool coating removal
- Waterproofing membrane removal
- Carpet adhesive removal
- Vinyl adhesive removal
- Industrial floor refurbishment
- Concrete floor preparation
- Concrete grinding contractors
- Industrial flooring contractors
- Epoxy flooring contractors
- Floor preparation specialists
- Concrete refurbishment contractors
- Commercial flooring installers
- Warehouse flooring contractors
- Industrial maintenance teams
- Coating-removal specialists
- Professional floor restoration contractors
What is a PCD diamond segment?
A PCD diamond segment is a specialised coating-removal component that uses Polycrystalline Diamond to scrape and rip coatings from the surface rather than simply grinding them.
What is a 1/2 PCD segment used for?
A 1/2 PCD segment is used within compatible PCD grinding tooling for aggressive removal of difficult surface coatings.
What is the Single 1/2 PCD segment specification?
The FloorsHQ Single 1/2 PCD segment is a 10 mm round segment with a 30-grit specification, product code 95/1/002.
Which rotation is the Single 1/2 PCD segment for?
FloorsHQ specifies the Single 1/2 PCD segment for machines with right rotation.
What coating thickness is this PCD segment designed for?
The FloorsHQ specification identifies the Single 1/2 PCD segment for thicker coating removal applications from approximately 1 mm to 4 mm.
Can PCD segments remove epoxy?
Yes. PCD tooling is designed for removing coatings including epoxy, urethane, mastics, glues and rubber.
Can PCD segments remove fibreglass?
Yes. FloorsHQ identifies PCD tooling as suitable for the removal of fibreglass linings, pool coatings and waterproofing membranes.
What is the difference between PCD and diamond segments?
PCD segments are primarily designed for aggressive coating removal, while conventional diamond segments are generally used for concrete grinding and surface preparation.
Is this a complete grinding cup?
No. The Single 1/2 PCD Diamond Segment is an individual segment component. Contractors requiring a complete coating-removal tool should select a compatible PCD grinding cup or disc.
When should a PCD segment be replaced?
A PCD segment should be inspected and replaced when it is excessively worn, damaged or no longer provides the required coating-removal performance.
| Feature | PCD Segment | Conventional Diamond Segment |
|---|---|---|
| Primary Purpose | Heavy coating removal | Concrete grinding and surface preparation |
| Removal Action | Scrapes and rips coating | Abrasively grinds material |
| Thick Coatings | Excellent | Application dependent |
| Sticky Coatings | Designed to reduce loading | Can load depending on coating |
| Epoxy Removal | Excellent | Application dependent |
| Concrete Grinding | Not its primary purpose | Excellent |
| Final Surface Refinement | Not its primary purpose | Better suited |
RELATED PRODUCTS
Falcon 500 Concrete Floor Grinder (Petrol) – Surface Grinding Machine
Stripp-Off Multi-Purpose Paint & Sealer Stripper
PCD Diamond Grinding Cups for Fast Floor Coating Removal
