Epoxy Tools

FEATURES

• Manufactured from abrasion resistant stainless steel.
• Precision engineered angled blade to keep the rake at 90 degrees during use – keeping material thickness constant.
• Gauging rake pulls 40% of the actual V-notch size.
• Details below in table.

USES

• Used to accurately spread self-smoothing and self-levelling systems.
• Use for self-levelling epoxy, urethane and cement screeds.
• Most commonly used to apply self-levelling systems between 500 microns and 4 mm.

FEATURES

• Manufactured from abrasion resistant stainless steel.
• Precision engineered angled blade to keep the rake at 90 degrees during use – keeping material thickness constant.
• Gauging rake pulls 40% of the actual V-notch size.
• Details below in table.

USES

• Used to accurately spread self-smoothing and self-levelling systems.
• Use for self-levelling epoxy, urethane and cement screeds.
• Most commonly used to apply self-levelling systems between 500 microns and 4 mm.

FEATURES

• Manufactured from Heavy-duty stainless steel with a pre-set Tri-glide at either end.
• Very Precise and accurate tool for medium thickness systems.
• Each glide has 3 working points making this tool very economical.
• Easy to adjust, simply unscrew and rotate.

USES

• For applying self- smoothing and self- levelling cement screeds from 3 to 10 mm.
• For applying epoxy and urethane screeds from 3 to 10 mm.

FEATURES

• Manufactured from heavy-duty stainless steel.
• Supplied with 2 heavy-duty adjustable anchor pins.

USES

• For applying self-smoothing and self-levelling systems.
• For cement screeds from 10 mm to 50 mm thick.

FEATURES

• Manufactured from stainless steel with 4 pre-set skegs.
• Very precise and accurate tool for medium thickness systems.
• Replaceable Skegs from 3 mm up to 10 mm.
• Due to the design the skegs last longer and wear slower than pins.
• Replaceable skegs make this tool very economical.

USES

• For applying self-smoothing and self-levelling systems.
• Use for self-levelling epoxy, urethane and cement screeds from 3 mm to 10 mm.

FEATURES

• Professional quality spike roller with steel frame and handle.
• 11 mm solvent resistant spikes.
• All spikes are locked together and turn as one unit.

USES

• Removes bubbles and helps to level self-levelling epoxy and urethane systems under 4 mm thick.
• Should not be used for self-levelling cement systems and systems thicker than 4 mm.
• The splash guard reduces spraying of material onto walls, and finished floors.

FEATURES

• Professional quality spike roller with steel frame and handle.
• 31 mm solvent resistant spikes.
• All spikes are locked together and turn as one unit.

USES

• Removes bubbles and helps to level self-levelling cement screeds and epoxy systems over 4 mm thick.
• Should not be used for self-levelling epoxy and urethane systems under 4 mm thick.
• The splash guard reduces spraying of material onto walls, and finished floors.

FEATURES

• Professional quality spike roller with steel frame and handle.
• 13 mm stainless steel spikes.
• Low surface tension enables longer working times.

USES

• Removes bubbles & helps to level epoxy & urethane systems under 4 mm thick.
• Should not be used for self-levelling cement systems and systems thicker than 4 mm.

FEATURES

• Professional quality spike roller with steel frame and handle.
• 19 mm stainless steel spikes.
• All spikes are locked together and turn as one unit.

USES

• Removes bubbles and helps to level self-levelling cement screeds and epoxy systems over 4 mm thick.
• Ideal for self-smoothing urethane screed systems.
• Ideal for epoxies between 500 & 1000 mic.
• 6 – 9 mm screed.

FEATURES

• Contractor quality spike roller with plastic handle.
• Solvent resistant spikes.
• All spikes are locked together and turn as one unit.
• Unit is lighter and tends to “push” less material.

USES

• Removes bubbles and helps to level self-levelling epoxy and urethane systems.
• Removes bubbles and helps to level self-levelling cement screeds.

FEATURES

• Contractor quality spike roller with plastic handle.
• Solvent resistant spikes.
• All spikes are locked together and turn as one unit.
• Unit is lighter and tends to “push” less material.

USES

• Removes bubbles and helps to level self-levelling cement screeds.
• Removes bubbles and helps to level self-levelling epoxy and urethane systems.

FEATURES

• Professional quality spike roller refills, for professional spike roller.
• 11 mm & 31 mm solvent resistant replacement spikes.
• All spikes are locked together and turn as one unit.

USES

• As per original spike rollers.

FEATURES

• Solvent resistant, durable black poly-prop bases.
• 13 x 25 mm spikes per shoe.
• All straps are supplied with metal buckles.
• One size fits all. Replacement straps and spikes available.

USES

• Used in the application of self-levelling epoxy, urethanes and cement screeds.
• To walk in self-levelling systems during the application process to spike roll and de-aerate.

FEATURES

• Manufactured from high quality spring steel.
• Provides the correct flex to evenly spread thin layers of material.
• Provides the required pressure for concrete priming.
• Standing improves efficiency and productivity.

USES

• For spreading of solvent free epoxy and urethane primers (from 50 to 150 microns)
• For self-levelling cement systems.
• For thin film coatings and feather edges.
• For very tight epoxy scraper coats.
• Effective at pushing cement dust after concrete grinding.

FEATURES

• Aluminium frame with non-marking solvent resistant rubber blades.
• Comes complete with handle.
• No replacement blades.

USES

• Multiple uses in various industries.
• For flooring, use to apply solvent free primers, silica filled primers, and epoxy scraper coats (from 150 microns to 400 microns).
• Best for epoxy quartz systems (Peran STB, Quartz Carpet, Stonecarpet, SLT).

FEATURES

• High quality steel frame manufactured to last.
• Replaceable food grade non-marking white rubber blades.

USES

• For applying epoxy sealer coats to urethane screeds & textured or aggregate scattered systems.
• For applying sealer coats to epoxy quartz systems (Peran STB, Quartz Carpet, Stonecarpet, Stoneshield, SLT).

FEATURES

• PVC coated wooden and steel applicator poles / sticks.
• Diameter – 25 mm thick.

USES

• For use with rollers, spike rollers, epoxy rakes and most other floor application tools.

FEATURES

• High quality 1.2 mm stainless steel blade.
• 15 mm x 15 mm V-notch profile will pull 6mm of material.
• Wooden handle and aluminium shank.
• 9 internal rivets.
• 280 mm x 115 mm

USES

• For applying 6 mm urethane screeds by hand.
• Reduces wastage and provides a uniform thickness.
• Eliminates the need for screed bars.

FEATURES

• Made from non-stick, non-marking PVC.
• Bevelled edges.

USES

• For the floating and smoothing of 6 – 9 mm epoxy and urethane hand applied screed mortars.
• Can be used to float and compact coloured aggregate screeds.

FEATURES

• 10 mm x 3 mm aluminium angle.
• Punched to allow for better adhesion.
• Applied to the wall with standard acrylic adhesive.

USES

• Installed on the wall at the required height to act as a finishing strip.
• For all epoxy or urethane screed coves.
• Can be applied on to concrete, plaster, Iso-panel or aluminium wall finishes.
• Eliminates the need to chop into plastered walls.

FEATURES

• Made from stainless steel to aid with application and smoothing of sticky screed mortars.

USES

• For the application of epoxy, urethane screed and MMA mortars.
• Used to form the radius or coved skirtings between the wall and floor junction.
• Can be used to form coloured aggregate coved skirtings.

FEATURES

• Made from stainless steel to aid with application and smoothing of sticky screed mortars.

USES

• For the application of epoxy, urethane screed and MMA mortars.
• Used to form the radius or coved skirtings between the wall and floor junction.
• Can be used to form coloured aggregate coved skirtings.

FEATURES

• Non-Drip Technology.
• Ultra heavy-duty caulking guns with aluminium barrel, handles and end caps.
• Thrust ratio of 18:1 for heavy materials.
• Can be used to fill the gun with a follower plate.
• Supplied with one standard nozzle.
• Threaded nozzle holders & threaded nozzles available up to 40 mm.
• Push Force – 4000N

USES

• For the application of silicone, polyurethane and polysulphide sealants.

FEATURES

• Light-duty aluminium caulking guns for cartridges and sausages.
• Aluminium end caps.
• Supplied with one standard nozzle.
• Thrust ratio 12:1.
• Push Force – 2000N

USES

• For the application of silicone, polyurethane and polysulphide sealants.
• Only suitable for soft materials.

FEATURES

• Made from non-stick PVC to aid with application and smoothing of sticky screed mortars.

USES

• For the application of epoxy and urethane screed mortars.
• Used to form the radius or coved skirtings between the wall and floor junction.
• Can be used to form coloured aggregate coved skirtings..

FEATURES

• Heavy-duty caulking guns with aluminium barrel, handles and end caps.
• Thrust ratio of 18:1 for heavy materials.
• Can be used to fill the gun with a follower plate.
• Supplied with one standard nozzle.
• Threaded nozzle holders & threaded nozzles available up to 40 mm.
• Push Force – 4000N

USES

• For the application of silicone, polyurethane and polysulphide sealants.

FEATURES

• Heavy-duty, all metal open type caulking gun.
• Thrust ratio of 18:1 for heavy materials.
• For use with up to 900 ml cartridge.
• Push Force – 4000N

USES

• For the application of silicone, polyurethane and polysulphide sealants.