H2O Seal & Shine™ Water-Based Floor Sealer for Stone, Cement & Concrete

Price range: R210.28 through R3,320.63

STONESHIELD™ H2O Seal & Shine™ is a professional water-based resin sealer designed to provide protective surface sealing for compatible concrete, cement, natural stone, paving, brick and masonry surfaces. It provides resistance against water, rain and staining while creating a protective surface film with a satin sheen and slight colour enhancement.

H2O Seal & Shine™ is particularly suited to contractors and property owners looking for a water-based alternative for sealing cement-based floors, cement tiles, oxidised cement surfaces, imprint paving and other compatible porous surfaces. The formulation can be used for both interior and exterior applications where the substrate and environmental conditions are suitable.

Unlike a purely penetrating water repellent, H2O Seal & Shine™ is a resin-type surface sealer that forms a protective film over the substrate. This makes it useful where the objective is not only to reduce staining but also to provide surface protection and improve the cleanability and appearance of the finished surface.

H2O SEAL & SHINE™ is purely for contractor use and not intended for DIY purposes.

CodeDescriptionUnits
203/01/010H2O SEAL & SHINE™1 Litre
203/01/050H2O SEAL & SHINE™5 Litre
203/01/200H2O SEAL & SHINE™20 Litre
What is H2O Seal & Shine?

STONESHIELD™ H2O Seal & Shine™ is a water-based resin surface sealer designed to protect compatible porous mineral surfaces while providing a satin sheen finish. It creates a protective surface film that helps resist water, rain and staining.

The product is designed for interior and exterior applications and can be used on compatible unpolished and medium-porosity natural stone, sandstone, slate, quartzite, cement tiles, coloured cement floors, bricks, concrete, plaster and masonry surfaces.

Key Features
  • Water, rain & stain resistant sealer™.
  • Water-based surface sealer provides a protective surface film.
  • Satin sheen finish with slight colour change.
  • Interior and exterior use.
Applications
  • Unpolished & medium porosity natural stone.
  • Sandstone
  • Slate
  • Quartzite
  • Cement tiles.
  • Coloured cement floors, tiles & bricks.
  • Concrete, plaster & masonry surfaces.
Who Should Use H2O Seal & Shine?
  • Flooring contractors.
  • Concrete contractors.
  • Stone restoration contractors.
  • Tile installation professionals.
  • Paving contractors.
  • Property maintenance contractors.
  • Commercial cleaning and floor-care contractors.
  • Renovation contractors.
  • Builders and construction professionals.
  • Landscape and paving professionals.
  • Property managers.
  • Homeowners maintaining cement, stone and paving surfaces.
FAQ

What is STONESHIELD™ H2O Seal & Shine™?

STONESHIELD™ H2O Seal & Shine™ is a water-based resin surface sealer designed to protect compatible concrete, cement, natural stone, paving, brick and masonry surfaces against water, rain and staining while providing a satin sheen finish.

Is H2O Seal & Shine™ water based?

Yes. H2O Seal & Shine™ is a water-based resin sealer designed to provide protective surface film and a satin sheen finish.

Can H2O Seal & Shine™ be used on concrete?

Yes, it can be used on compatible concrete surfaces. The concrete should be clean, sound, dry and suitable for the product before application.

Can H2O Seal & Shine™ be used on cement tiles?

Yes. H2O Seal & Shine™ is suitable for compatible cement tiles and is specifically recommended for cement-based flooring applications.

Can H2O Seal & Shine™ be used on paving?

Yes. It is suitable for compatible imprint paving and certain cement-based paving applications.

Can H2O Seal & Shine™ be used outdoors?

Yes. H2O Seal & Shine™ is designed for both interior and exterior use when the substrate and application conditions are suitable.

What finish does H2O Seal & Shine™ provide?

H2O Seal & Shine™ provides a satin sheen finish with slight colour change. It is designed to provide a more subtle appearance than strongly colour-enhancing wet-look sealers.

Does H2O Seal & Shine™ form a surface film?

Yes. H2O Seal & Shine™ is a resin sealer that provides a protective surface film.

How many coats of H2O Seal & Shine™ are required?

A minimum of two coats for H2O Seal & Shine™. Always follow the current product label and technical instructions for the specific application.

How long should I wait before applying another coat?

Approximately two-hour overcoating time under the specified conditions. Actual drying can vary with temperature, humidity, substrate and application conditions.

Can H2O Seal & Shine™ be applied to a damp floor?

No. H2O Seal & Shine™ should not be applied to damp tiles or surfaces. The substrate should be sufficiently dry before sealing.

Can H2O Seal & Shine™ be used on sandstone?

Yes. It is listed for use on compatible unpolished and medium-porosity natural stone, including sandstone.

Can H2O Seal & Shine™ be used on slate?

Yes. Compatible slate surfaces can be sealed with H2O Seal & Shine™ when the substrate meets the product requirements.

Can H2O Seal & Shine™ be used on quartzite?

Yes. Compatible quartzite surfaces are included among the natural stone applications.

What is the difference between H2O Seal & Shine™ and Cement-Sealer™?

H2O Seal & Shine™ is a water-based resin sealer with a satin sheen and slight colour change, while STONESHIELD™ Cement-Sealer™ is a solvent-based resin sealer designed to provide a stronger colour-enhancing wet-look finish.

What is the difference between H2O Seal & Shine™ and Premium-Plus™?

H2O Seal & Shine™ is a water-based sealer suitable for interior and exterior applications, while STONESHIELD™ Premium-Plus™ is a solvent-based system designed for high-gloss, premium protection and interior applications.

Is H2O Seal & Shine™ suitable for high-traffic industrial floors?

H2O Seal & Shine™ should be selected according to the required traffic and performance level. Use other STONESHIELD™ systems, including Premium-Plus™, for higher-traffic industrial and commercial concrete application. Substrate and project requirements should be assessed before selecting a sealer.

How should H2O Seal & Shine™ be maintained?

Use STONESHIELD™ Daily-Clean™ for routine maintenance of sealed surfaces and reapply the original STONESHIELD™ sealer if staining occurs or the surface becomes difficult to clean.

What sizes is H2O Seal & Shine™ available in?

1 litre, 5 litre and 20 litre sizes.

H2O Seal & Shine vs Other Stoneshield Sealers
Feature H2O Seal & Shine™ Cement-Sealer™ Premium-Plus™
Sealer Type Water-based resin sealer Solvent-based resin sealer Solvent-based resin/urethane sealer
Finish Satin sheen Satin / wet-look finish High gloss / wet-look finish
Colour Enhancement Slight colour change Colour enhancing Colour enhancing
Interior Use Yes Yes Yes
Exterior Use Yes Yes No
Typical Applications Cement tiles, oxidised cement, imprint paving and compatible stone/concrete Cement tiles, pavers, cobbles and suitable cement floors Concrete, cement screeds, pavers and higher-traffic interior floors
Water / Solvent Based Water-based Solvent-based Solvent-based
Minimum Coats 2 1 2
Best For Water-based protective satin finish Colour-enhancing satin wet look High-gloss premium protection

Under no circumstances shall STONESHIELD cc T/A FLOORSHQ accept any liability for damage, direct or consequential, arising from any use or misuse of our products. Always test first. Determining suitability of product shall be the sole responsibility of the user.

RELATED PRODUCTS