Weldy HT 1600 Replacement Heating Element – 230V 1550W

• Replacement heating element for compatible Weldy HT1600 equipment
• 230 V electrical specification
• 1550 W heating element
• 26 mm heating element diameter
• Original replacement component
• Designed for the Weldy energy HT1600
• Suitable for professional hot-air welding equipment maintenance

A heating element may require replacement when the WELDY HT1600 no longer produces heat correctly or when inspection and servicing indicate that the element has failed or become damaged.

Signs Your Weldy HT 1600 May Need a New Heating Element

• The heat gun is not producing heat
• The machine produces insufficient heat
• Heating performance is inconsistent
• The machine does not reach its expected operating temperature
• The heating element shows visible signs of damage during inspection
• A qualified technician has diagnosed a failed heating element

These symptoms can also be caused by other components or operating conditions. Proper diagnosis is recommended before replacing electrical components.

This FloorsHQ replacement heating element is the 230 V / 1550 W version.

Do not order this part solely because your machine is labelled HT1600. WELDY also produces a 120 V / 1550 W heating element with a different article number.

Check the voltage and article number of your equipment before ordering.

• Confirm your machine is a WELDY energy HT1600.
• Confirm the machine requires the 230 V version.
• Check that the required element is rated at 1550 W.
• Check the article number where possible.
• Confirm that you are replacing the heating element rather than another electrical component.
• If your machine is an HT1600 D, confirm the correct spare-part reference before ordering.

The WELDY HT1600 contains electrical and high-temperature components. Replacement should be carried out with the equipment disconnected from power and according to the manufacturer's service instructions.

If you are not qualified to service electrical hot-air equipment, have the heating element replaced by an appropriately qualified technician.

Do not operate the equipment with damaged electrical components or with incorrectly installed replacement parts.

What heating element does the Weldy HT 1600 use?

The compatible 230 V Weldy energy HT1600 uses the 1550 W heating element identified by Weldy as article 123.805.

What is the FloorsHQ code for the Weldy HT 1600 heating element?

FloorsHQ lists the replacement heating element under code W123/805.

Is the Weldy HT 1600 heating element 230 V?

This replacement element is the 230 V version and is rated at 1550 W.

Is there a 120 V Weldy HT 1600 heating element?

Yes. Weldy also lists a 120 V / 1550 W heating element under article 123.895. Check your machine voltage before ordering.

What is the diameter of the Weldy HT 1600 heating element?

The heating element diameter is 26 mm.

Does this heating element fit the Weldy HT1600 D?

Do not assume compatibility with the HT1600 D. The HT1600 D uses separate component references, so the exact machine model and spare-part number should be checked before ordering.

What does the Weldy HT 1600 heating element do?

The heating element produces the heat required by the HT1600 hot-air heat gun for heating and plastic-welding applications.

How do I know if my Weldy HT1600 heating element has failed?

Possible symptoms include failure to produce heat, insufficient heating or inconsistent heating. These symptoms can also have other causes, so appropriate diagnosis is recommended before replacing the element.

Is this a complete Weldy HT 1600?

No. This product is the replacement heating element only. It is not the complete HT1600 hot-air heat gun.

Can I replace the heating element myself?

Replacement involves working on an electrical heating appliance. Follow the manufacturer's service instructions and use a suitably qualified technician where required.